Leapers UTG PRO Picatinny Rings
Product options:
1"
30mm
34mm
Available in 1"(Low, Medium, High),30mm(Low, Medium, High), and 34mm(Medium, High)
 |
 |
- Proudly Designed and Made in USA
- The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
- Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
- Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
- Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
- 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
- Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
- Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
- UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
Related Categories
Scope Rings
Brand: Leapers |
Code:
LP-RWU012510
Code:
LP-RWU013010
Code:
LP-RWU013415
Product options:
1"
30mm
34mm
Brand: Leapers |
Code:
LP-RWU012510
Code:
LP-RWU013010
Code:
LP-RWU013415
At a glance
Available in 1"(Low, Medium, High),30mm(Low, Medium, High), and 34mm(Medium, High)
Related Categories
Scope Rings
|
|
- Proudly Designed and Made in USA
- The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
- Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
- Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
- Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
- 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
- Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
- Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
- UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
