We continue to operate our warehouses at full capacity with safetyand sanitary procedures in place to minimise risks.
Our employees are determined to continue serving our customers.
Thank you for your continued support - stay safe.
Once powered on, the PRO-XR automatically scans the 2.4 GHz frequency spectrum and selects the best available frequencies to use for its connection, thereby avoiding interference-prone frequency bands.
The activity of 2.4 GHz devices in a given area can change frequently and rapidly. That is why the PRO-XR constantly monitors this range and automatically and seamlessly changes its transmission to use different frequencies when it detects the possibility of interference.
Further fortifying the system’s resistance to interference, PRO-XR employs Azden’s proprietary Signal Redundancy Technology, in which the transmitter sends two copies of its signal to the receiver at all times, each on a different frequency. If the system predicts interference of the primary signal, it will instantly switch to using the secondary signal without any interruptions.
While many other digital wireless systems are moving to under-performing internal antennas, the PRO-XR system employs a more reliable external antenna design and comes with two interchangeable antenna options for the transmitter: a flexible antenna for comfortable and inconspicuous wearing of the transmitter, and a high-gain antenna for increased performance especially at long distances and with line-of-sight obstruction.
Change the transmission output power of the transmitter to adapt to challenging environments. Use the default 20 mW setting for optimal battery life and excellent performance in most situations. Optionally increase the output power to 50 mW or 100 mW for better performance at extreme distances, or to overcome line-of-sight obstructions and over-crowded Wi-Fi environments. Combining the 100 mW output with the use of the included high-gain transmitter antenna can extend the range of the system up to an incredible 500 feet!
The built-in, rechargeable lithium-ion batteries provide up to 20 hours of run time on the receiver and 14 hours on the transmitter; plenty of power for a long day of shooting. Eliminates the hassles of single-use batteries and reduces e-waste. The system comes with a dual-USB charging cable and AC adapter.
The professional-grade, omni-directional lavalier microphone captures the full frequency range of 20 Hz to 20 kHz, ensuring crisp and clear recording of your subject’s voice. The angled 3.5 mm TRS plug allows compatibility with many other wireless systems and recorders.
The receiver includes a 3.5 mm headphone jack for monitoring, and a 6-step adjustable output gain control for optimizing audio levels with your camera.
For extra flexibility, the transmitter allows for the connection of line-level audio devices via the 3.5 mm auxiliary input. This input can be connected to the output of an audio mixer, digital recorder or any other line-level source./p>
The PRO-XR is also compatible with smartphones and tablets out of the box. Easily mount the PRO-XR receiver to your smartphone with the included Smartphone Mount. A Lightning-to-headphone adapter cable is included for connection to iOS devices. A TRRS output cable is included for other devices with headphone jacks. No special apps are required to use the PRO-XR’s audio when shooting video on your mobile device.
The included mount uses a spring-loaded clamp to tightly grip down onto almost any smartphone. It can accommodate phone widths from 2.4 in. – 3.3 in., making it compatible with even the largest smartphones (phablets) on the market today. Unlike many other phone mounts, ours is equipped with a cold-shoe slot, allowing you to mount a microphone, wireless receiver, or other accessories. The mount itself is mountable to any tripod or pole via a ¼”-20 threaded hole. Built to last, the mount is all-metal construction and quality tested to withstand over 6,000 pulls.
Digital 2.4 GHz
Number of RF Channels
1 x Bodypack with Microphone
Max Operating Range
152.4 m (Line of Sight)
90 dB (Mic Input) 87 dB (Instrument Input)
Shoe-Mount (with Included Hardware)
1 x 1/4 Wave External
Number of Audio Channels
1 x 3.5 mm TRS Female Unbalanced Mic Output 1 x 3.5 mm TRS Female Unbalanced Headphone Output
Audio Output Level
1.5 dBV (Max)
1 x Mini-USB (Bus Power, Charging)
3.5 mm Output: 2 Kilohms Headphone Output: 10 Kilohms
Battery or Bus Power (USB)
1 x Built-In Rechargeable (Included)
Internal Battery Capacity
Battery Charging Time
Approx. Battery Life
Battery Cycle Count
Up to 500 Cycles
4.8 x 7.9 x 1.4 cm
Bodypack with Microphone
RF Output Power
20 / 50 / 100 mW
2 x 3.5 mm TRS Female Unbalanced Input
Audio Input Level
22 dBV (Mic Level) 2 dBV (Line Level)
60 Hz to 20 kHz (Mic) 30 Hz to 20 kHz (Line)
Low: 14 Hours Med.: 12 Hours High: 10 Hours
20 Hz to 20 kHz
1 x 1/8" / 3.5 mm TRS Male Unbalanced
3.94' / 1.2 m
1 to 10 V
USB Charge Cable
EX-507XR Lav Mic
Audio Output Cable
High-Gain Antenna (x2)
TX Flexible Antenna
To be the first to review this product simply fill out the form to the left and let us know how you feel about this product!
To estimate the freight on this item simply enter the destination postcode and the desired quantity and click the "estimate" button.
Get Free Shipping on all orders! No minimum spend! Items are dispatched from our Melbourne Warehouse within 24 Hours*
Shop with peace of mind knowing all items sold @ C.R.Kennedy & Co are backed by genuine manufacturers warranty.
Place a Click and Collect order online and pickup from your nearest warehouse.
C.R. Kennedy is Australia’s leading importer and distributor of photographic equipment. Our head office and main warehouse is located in Melbourne with branch offices and warehouses in Adelaide, Brisbane, Cairns, Perth and Sydney.
© 2020 C.R. KENNEDY.
All rights reserved.
We pay the store, you take the goods the same day.
Choose how you pay - weekly, fortnightly or monthly.
Up to $1,000 interest free always or up to $1,000 with 6 months interest free.
*A $6.00 monthly account fee applies. Pay your balance by the due date (the end of next month) and we'll waive the fee. See full Ts & Cs
STOCK DUE The product is not currently in stock however our best estimate of the date we are due to receive more stock is indicated by the date shown. This does not guarantee all orders placed will be able to be fulfilled from the stock we are receiving on this date but is the best date we are able to provide as an estimate.Also note once we receive stock it may take a number of days for this stock to be sent to our customers
ON ORDER The product is on order with a supplier but not currently in stock and we do not have a clear enough date from our supplier as to when the stock is due to arrive.In this situation we cannot therefore provide an estimated availability date to you
NO STOCK The product is not currently in stock and we do not have this on order with a supplier
If you have questions about the availability of items on our web site or if you have placed an order for products not in stock and would like further information or wish to cancel your order please Contact Us and include the product code and/or order number so we can assist you further