Leapers UTG-PRO 34mm Medium Picatinny Mount Rings
$180.00
HURRY! Only 5 units left
 |
 |
- Proudly Designed and Made in USA
- Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 32mm Center Height to Fit Optics with a 34mm Tube, and up to a 63mm Outer Objective
- The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
- Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
- Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
- Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
- 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
- Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
- Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
- UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
Related Categories
Scope Rings
Brand: Leapers |
Code: LP-RWU013415
APN: 4717385551688 |
Supplier Code: RWU013415
Brand: Leapers |
Code: LP-RWU013415
APN: 4717385551688 |
Supplier Code: RWU013415
Related Categories
Scope Rings
|
|
- Proudly Designed and Made in USA
- Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 32mm Center Height to Fit Optics with a 34mm Tube, and up to a 63mm Outer Objective
- The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
- Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
- Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
- Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
- 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
- Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
- Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
- UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
